Konica Minolta IC-601 - Manual (Page 35)

IC-601 4-7
4.5 Sending to the SMB Server 4
4.5 Sending to the SMB Server
You can send the data read in from the copier's ADF or the original scanning glass (scanned data) to the SMB
server.
The scanned data sent to the SMB server can be file-shared with computers with the SMB protocol.
For detailed information on how to operate the function, refer to page 6-20.
7 CAUTION
When using this function for Mac OS X 10.7 or later, the following settings are required:
-
Only NTLMv2 should be specified for the NTLM setting.
- The date/time (time zone) setting should be adjusted between this machine and a computer.
For details about the NTML setting or date/time setting, refer to the "User's Guide (Main Body)" or "User's
Guide (POD Administrator's Reference)."
4.5.1 Items to be configured
In order to send the scanned data to the SMB server, the following items need to be configured.
Register Name
You specify a register name for the SMB server.
Reference Name
You specify a reference name as a keyword for searching.
Host Address
You specify an SMB server name or an IP Address of the SMB server.
File Path
You specify a directory in the SMB server.
Login Name
You specify a Login Name for the SMB server.
Password
You specify a corresponding Password to each Login Name for the SMB server.
SMB server
Oroginal
Scan
Copier