8 about the scan settings screen, About the scan settings screen -34, About the scan settings screen (p. 6-34) – Konica Minolta IC-601 User Manual

Page 97

Advertising
background image

IC-601

6-34

6.8

About the Scan Settings Screen

6

6.8

About the Scan Settings Screen

Pressing [Scan Settings] on the Select Addresses screen displays the Scan Settings screen. On the Scan Set-
tings screen, such settings as original settings and quality settings can be configured.

1

2 3 4

5

7

6

8

9

11

13

10

12

14

No.

Item

Description

Refer-
ence page

1

[Original Setting]

You can set various settings on the original such as the original orientation,
bind direction, etc.

p. 6-35

2

[Separate Scan]

Original on multiple sheets which cannot be transmitted by ADF can be
read using the original glass.

3

[Image Area]

Enable/disable [All-image] for setting the scanned range.

[All-image]

Set this to scan the page as an image.

4

[Quality Adj.]

Specify the density or contrast for scanning.
It is disabled when [Black] is selected as the color mode.

p. 6-36

5

[Zoom]

You can specify various settings on zooming for scanning.
To change a zoom level, a setting is required. For more information, con-
tact your service representative.

p. 6-37

[+][-]

Specify a zoom level for scanning.

[4.00][2.00]

You can specify the registered zoom level.

6

[Color]

Specify a color mode for scanning.

p. 6-37

[Full Color]

Select this to scan in the full color mode.

[Gray Scale]

Select this to scan in the gray scale mode.

[Black]

Select this to scan in black and white color.

7

[Color Space]

You can specify [sRGB] and [Adobe RGB] as the color space for scanning
when [Full Color] is selected as the color mode.

[sRGB]

Specify sRGB as the color space for scanning.

[Adobe RGB]

Specify Adobe RGB as the color space for scanning.

Advertising
This manual is related to the following products: