Konica Minolta KIP 7100 - Manual (Page 77)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 76 -
b. These permissions should include the ability to write and modify on this shared folder.
f. Username and Password should be set as an accessible login username from either the
workgroup workstation/server or the authentication server/domain controller.
g. Touching on Test SMB will make the KIP attempt to establish a connection to the destination
workstation/server.
a. This is a semi-permanent mapped network drive (Z:)
b. The connection is established when the SMB mailbox is selected and is disconnected
when:
i. Switching Formats
ii. Pressing the STOP button
iii. Switching menus (SCAN, COPY, JOB INFO, ?)
iv. Selecting another mailbox
v. Creating another SMB mailbox
vi. Reset timer expiration
vii. Log off
It is possible to scan all file formats to an SMB location. Please note that color image data is much larger
and may take considerable network resources in order to transfer from the KIP to the SMB location. (A
full color, 600 DPI, tiff packbit can be several gigabytes in size).
When scanning multi page documents (PDF, DWF and TIFF), the images are scanned to a temporary
location on the KIP & then transferred to the SMB location once the Close File button has been pressed.