Konica Minolta KIP 7100 - Manual (Page 80)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 79 -
• Use as Default Mailbox – Sets this to the Default mailbox when entering the SCAN screen
• Save and Continue – Allows a user to input many mailboxes without having to enter the
mailbox creation page
• OK – Exits the mailbox creation page with saved changes
• Cancel – Exits the mailbox creation page and terminates all current information on the page
FTP Locations
Please contact your network administrator for details on how to configure and load FTP locations into
the KIP printer Scan Mode. FTP locations can be set up easily through KIP PrintNET. Please see the KIP
PrintNet Manual for details. Please see your network administrator for access to your FTP and the
retrieval of the documents from the FTP.
Adding FTP Mailbox Location from KIP PrintNET
Administrators now have the ability to create FTP
scanning destinations directly from KIP PrintNet.
Select “FTP” from the list of available tabs to display
configuration parameters.
Once an SMB destination is configured, it will be
displayed in the list of available destinations on the left
hand side of the screen prefixed by “SMB:”
Please note: Files scanned to SMB & FTP destinations
cannot be seen or selected from the PrintNet interface.