Konica Minolta bizhub 421 - Manual (Page 16)

Fax Driver 2-5
Installing the fax driver 2
2
Click "Printer Install".
The installation of the printer driver starts.
3
Click the [AGREE] button if you agree with all terms and conditions of the license agreement.
– If you do not agree with the terms and conditions of the license agreement, the software cannot be
installed.
– You can change the display language of the installer using the drop-down list.
4
When the setup selection dialog box appears, click the [Install printers/MFPs] button, and then click the
[Next] button.
The connected printers and copiers are detected.
– If the printer is not detected, turn the main power off, then on again.
When the turning the power off, then on again, wait at least 10 seconds before turning the power
on again; otherwise, this machine may not function properly.
5
Select this machine, and then click the [Next] button.
– If the connection of this machine cannot be recognized, the machine will not be listed. When this
occurs, select "Specify the Printer/MFP Except for the Above. (IP Address, Host Name)", and then
specify this machine directly.
– In addition to "Normal Printing" (Port9100, USB), "Internet Printing" (IPP) or "Secure Printing" (IPPS)
can also be selected as the connecting method. Secure Print (IPPS) can be used when SSL is
enabled from Web Connection and IPP is enabled.