Konica Minolta Biznub Series - Manual (Page 22)

Device Registration 4
Device Set-Up 4-3
6
When the administrator password of the device is required to be en-
tered, enter the password and then click [OK].
7
Click [Close] in Result of Registration Processing window.
8
Click [Close].
The devices are registered.
2
Note
It sometimes takes more than two minutes before the device registered
is displayed in the Device list on the main window.
When the device cannot be searched:
There is a possibility that this is not set as “Exceptions program” while in
the setting of the firewall. Set this application as “Exceptions program”
while in the setting of the firewall for the network setting of the PC.