Konica Minolta Biznub Series - Manual (Page 16)

How to Use the Device Set-Up 3
Device Set-Up 3-3
To change settings
Automatic protection settings can be changed using the menu above the
main window.
1
Click [Tool] from menu and select [Option] - [General].
2
Select [Auto protect] in [Target of setting] field.
3
Change the Auto protect settings, and then click [OK].
– To turn off automatic protection, clear the check box.
– To change the timeout time, click [Change Timeout Period], and
then change the setting.
– To change the access password, click [Change password], and
then change the password.
The changes are applied to the settings, and the main window appears.