Konica Minolta Biznub Series - Manual (Page 6)

Getting Started 1
Device Set-Up 1-1
1 Getting Started
1.1 System Requirements
Systems must have the following specifications in order to use this software.
-
Operating System
Windows XP Professional (SP3 or later)
Windows XP Professional x64 Edition (SP2 or later)
Windows Vista Enterprise (SP2 or later)*
Windows Vista Business (SP2 or later)*
Windows Vista Ultimate (SP2 or later)*
Windows 7 Enterprise (SP1 or later)*
Windows 7 Professional (SP1 or later)*
Windows 7 Ultimate (SP1 or later)*
* 32-bit(x86) and 64-bit(x64) editions are supported.
- Computer
According to the recommended system requirements of your operating
system.
- Memory (RAM)
According to the recommended system requirements of your operating
system.
- Unused hard drive capacity
100 MB or more
- Display
800 × 600 pixel, 16 bit - color or better
- Network
TCP/IP protocol
- Applications
Microsoft Internet Explorer 6.0 (SP1) or later
Microsoft .NET Framework 2.0 (SP2 or later) <Windows XP>
Microsoft .NET Framework 3.5 (SP1 or later) <Windows Vista>
* The edition of .NET Framework required for this software is pre-installed
on Windows 7.
- Supported Devices
For details of the copier and the printer (supported device of the plug-in
application) of KONICA MINOLTA, see the Readme of each plug-in ap-
plication.
Refer to the Readme file for the latest information about service packs and
so on.