Konica Minolta KIP 9900 - Manual (Page 14)

Mac/Unix Printing
Version A4
3. Enter the LPR/LPD Queue name
The “LPD Printer Name” entry on the IPS must match the “Queue Name” from the Mac
system. The list of IPS Queue Names already on the system can be viewed in the Windows
Printers section on the IPS; they are defaulted to KIP, IPS, IPS1, IPS2, and IPS3. Type in one of
these 5 queue names. Note: These are NOT shared printers, they are only used for LPR based
printing.
4. Configure the Print Parameters for the LPD Printer Name.
Choose “Configure LPD Directory” to set the Print Parameters. The items configured
here will be used every time a file is printed to this LPD Printer Name.
Print Parameters:
Enlarge/Reduce: set to a Percentage or one of the Force Size schemes in this list. This setting will always be used
when printing to the Queue Name/LPD Printer Name.
Media Type: set to a Media Type that will always be used when printing to the Queue Name/LPD Printer Name.
#of Copies: set the number of copies that will always be used with this LPD Printer Name.
Rotate/Fold: set the rotation and KIP Folding parameters that will always be used with this LPD Printer Name.
4
5
5