Konica Minolta magicolor plus - Manual (Page 15)

E-15
Use this procedure to set the copyboard’s operating environment from the computer. The factory defaults are
shown below.
Setting item Description Factory default
Date/time setting Set of the date and time for the time stamp Japan Standard Time
File Format
Sets the format of the images stored on the USB memory
device.
JPEG/PNG/PDF
PNG
Paper Size A4/Letter A4
Aspect Ratio
Sets the aspect ratio for printed images.
Original Image/Match Paper Size
Match Paper Size
Erase Reminder Sheet rear surface erase reminder function: Disable/Enable Disable
Restrict color mode Setting for disabling printing/storing in the color mode Disable
Resolution
Selection of resolution for images stored in the memory and
images transferred to the computer : Standard
Standard : 1/2 the vertical/horizontal size of the scanned image
High : 1/1 the vertical/horizontal size of the scanned image
Standard
Header/footer (date/
time stamp)
Upon shipment from factory :
Writing of date/time when printing/storing : Enabled/Disabled
Original editing : Header/footer data output *
Enabled
Hardware Setup
Turn on the copyboard’s power, start up the computer, then make the USB
connections.
The “PLUS TOOLBOX” main menu appears on the computer.
Click the [Setup] button.
The [Hardware Setup] screen appears.
Click the desired item to select it.
For the radio buttons, when is clicked, it
switches to (only one radio button can be
selected within each item).
• Print setting
This is operational when the Copyboard and printer are
connected.
Paper Size
Select whether to print on A4 or letter size paper.
* The date/time stamp can be displayed at the user’s discretion as part of the header/footer data.
Upon shipment from the factory, only the time stamp is displayed.
Only printer models specified by PLUS can be con-
nected to the Copyboard.
Note