Konica Minolta magicolor plus - Manual (Page 3)

E-3
Introduction
What is Copyboard Soft ?
The “PLUS TOOLBOX” software is an application for connecting the copyboard directly to a computer by USB
port to allow transfer of the scanned data to the computer using a TWAIN driver so that the data can be stored
on the computer as image files. It can also be used to manage the copyboard’s operating environment and secu-
rity settings from the computer.
Notice
• The security settings apply to the connection between the copyboard’s USB memory and computer. They can be set to
prohibit deleting or unauthorized setting by anyone other than the administrator. In consideration of password manage-
ment, etc., please note that this security function can only be enabled after contacting PLUS Vision.
The security settings can also be made via USB memory.
Operating Environment
Supported OS: Microsoft Windows 2000 Professional (Service Pack 4 or higher) /
XP (Home Edition /Professional Edition Service Pack 2 or higher) /
Vista (32 bit version)
Supported PC: IBM PC/AT fully compatible computers that run the aforementioned OS
CPU: Pentium III 1.2GHz or greater
Memory: Windows 2000 (128 MB or greater),
Windows XP (256 MB or greater),
Windows Vista (512 MB or greater)
Connector: USB port (type A), interface compatible with USB 1.1 and USB 2.0 standards.
Available hard disk space: 40 MB or greater (not including space for storing images)
Display resolution: 800 x 600 pixels or greater
Peripheral devices: CD-ROM drive, standard USB ports
Web browser: Internet Explorer 6.0 or higher
• All operations are not guaranteed in the aforementioned operating environment.
• Windows 95, 98SE/Me, NT, 2000 Server, Server 2003, and Vista (64 bit version) are not supported.
Notice