Konica Minolta bizhub C654 - Manual (Page 43)

bizhub C754/C654 2-19
2.3 Power supply 2
2.3.3 Power save function
When a specified amount of time (default setting: 15 minutes) has elapsed without the machine being oper-
ated, the Touch Panel will go off, and it automatically enters the power save mode. The Power key flashes
blue in the power save mode. The power save mode returns to the normal mode by pressing any key on the
Touch Panel or Control Panel.
There are two power save modes: the low power mode and the sleep mode. Sleep mode provides a greater
power saving effect than Low Power mode. However, the time required to return to Normal mode is longer
than the time required to revert to Low Power mode.
d
Reference
The time required to shift to each mode can be changed in the Administrator Settings. For details, refer to the
User's Guide DVD.
Manually switching to the power save mode
To manually switch to the low power or sleep mode before the machine shifts to the power save mode,
change the settings of the Power key on the Control Panel to [Power Save].
Tap [Utility], and select [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] -
[Power Key Setting].
For information on the default administrator password, refer to the [Quick Assist Guide].
After the setting is changed, the power save mode shifts as shown below depending on how the Power key
is pressed.
- Pressing the Power key
– This machine shifts to the power save mode (low power or sleep mode). The power save mode returns
to normal mode by pressing any key on the Touch Panel or Control Panel.
- Holding down the Power key
– This machine shifts to the Sub Power OFF mode. Pressing the Power key returns to the normal mode.
d
Reference
For details, refer to the User's Guide DVD.
2 1