Konica Minolta bizhub 4750 User Manual
Copying (basic operation flow)
% For details on copy settings, refer to the respective columns of the following table.
If necessary, specify the number of copies using the Keypad.
% Tapping [No. of Sets] displays the Keypad.
% If [Keypad] is assigned to a Register key, you can press the Register key to display the Keypad on
the Touch Panel and enter data.
% To re-enter the number of copies, tap [C].
Press the Start key.
% If necessary, before starting a copy, tap [Check Settings] to check the settings.
% If you press the Stop key while scanning the original, scanning stops. To cancel scanning the orig-
inal, delete inactive jobs from the Job screen.
The original is scanned, and copying starts.
You can change the default copy settings to suit your environment.
To configure settings: [Utility] - [User Settings] - [Copier Settings] - [Default Copy Settings]
To specify the image quality, density, etc. for copying
To reduce paper consumption using 2-sided copying or the Combine function
To change the size or type of the paper to be copied
To specify the original scanning method and copy output method
To add the date, page number, stamp, etc. on copied documents