Kip cost review application, Installation – Konica Minolta KIP 7100 User Manual
Page 3
KIP Cost Review Application
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.
2012 KIP. vii_iv
- 2 -
Installation
The following are general steps of the installation of the Cost Review Application.
Please note that it is necessary to have the KIP 7.4 version software installed on the KIP for CRA function on the
KIP 700M, 7100, 7700, 7900 and 9900 or C7800.
Step 1
Double click the installer for the Cost Review Application and set the desired language
Note: The language of the KIP System must be that same of the PC that the CRA is also installed on.As an
example if the KIP System is in the Japanese language then the PC with CRA must also be in Japanese.
Step 2
Installer will run installing the application, when prompted select “Next” and accept the terms of the license
agreement. And select “Next”.