Konica Minolta BIZHUB C360 - Manual (Page 18)

bizhub C360/C280/C220 2-10
2.1 Control Panel and functions 2
d
Reference
To return to the basic settings screen, press the Accessibility, [Close], or Reset key.
[System Auto Reset Confir-
mation] Configure this setting to display the screen that allows you to select either
to continue the operation without exiting the enlarge display mode or to
exit the enlarge display mode and return to the basic settings screen when
the system auto reset operation is invoked in the enlarged display.
Press the corresponding button in the Touch Panel, or press the 3 key on
the Keypad. To display a confirmation screen, select the length of time that
the message is to be displayed.
[Auto Reset Confirmation] Configure this setting to display the screen that allows you to select either
to continue the operation without resetting the current settings or to reset
the settings when the automatic reset operation is invoked in the enlarge
display mode to reset the setting to the default.
Press the corresponding button in the Touch Panel, or press the 4 key on
the Keypad. To display a selection screen, select the length of time that
the message is to be displayed.
[Enlarge Display Mode
Confirmation] When you press the Enlarge Display key to switch the screen to the en-
larged display mode, those settings that cannot be configured in the en-
larged display screen will be canceled. Configure this setting to display the
screen that allows you to select either canceling those settings to enter the
enlarge display mode or continuing the operation without entering the en-
larged display mode.
Press the corresponding button in the Touch Panel, or press the 5 key on
the Keypad.
[Message Display Time] For details, refer to the [User's Guide Copy Operations].
[Sound Setting] For details, refer to the [User's Guide Copy Operations].
[Default Enlarge Display
Settings] Change the default settings of the enlarge display.
Configure the default settings in the enlarged display screen, and then
press the corresponding button in the Touch Panel, or press the 3 key on
the Keypad in page [2/2]. Select a function, and select either [Factory De-
fault] or [Current Setting].
•
[Default Enlarge Display Settings] can be configured by pressing the
Accessibility key when the enlarged display screen is displayed.
• Only the function displayed on the screen immediately before the Ac-
cessibility key is pressed can be selected.
• You can also change the default settings in User Settings. For details,
refer to page 2-7.
Settings