2 loading originals, Loading the original into the adf, Placing the original on the original glass – Konica Minolta BIZHUB C360 User Manual

Page 22

Advertising
background image

bizhub C360/C280/C220

2-14

2.2

Loading originals

2

2.2

Loading originals

Place the original in the ADF or on the Original Glass. Select the optimal position for setting the original ac-
cording to the type of original to be copied.

-

By using the ADF, a multi-page original can be fed automatically one page at a time. The double-sided
originals can also be scanned automatically.

-

When you are using the Original Glass, place the original directly on the Original Glass to scan. The
original glass is best suited for books and originals that cannot be fed through the ADF.

Reference

-

ADF is an option.

Loading the original into the ADF

1

Slide the Lateral Guide to fit the size of the original.

2

Load the original face up in the Original Tray and arrange accord-
ing to the scanning order.

% Place the original pages so that the top of the original is to-

ward the back side of the machine.

% Do not stack originals exceeding the , mark.

% If the document is loaded in any orientation other than with the

top of the document toward the back of the machine, be sure
to select the document orientation.

3

Slide the Lateral Guide against the edges of the original.

Placing the original on the Original Glass

1

Lift open the ADF or the Original Cover 20 or more degrees.

% Unless you lift the ADF more than 20 degrees to open it, the correct document size may not be de-

tected.

2

Place the original face down on the Original Glass.

% Place the original pages so that the top of the original is to-

ward the back or the left side of the machine.

% Align the original with the

mark in the back-left corner of

the Original Scale.

% For transparent or translucent originals, place a blank sheet of

paper of the same size as the original over the original.

3

Close the ADF or the Original Cover.

Advertising
This manual is related to the following products: