Konica Minolta BIZHUB C360 - Manual (Page 49)

bizhub C360/C280/C220 4-8
4.2 Configuring destinations 4
4.2.4 [Fax Number]
Enter a fax number or registered destination number to specify the desired destination for sending a fax to.
%
Press [Fax Number].
Reference
- If [Confirm Address (TX)] is enabled in Administrator Settings, the screen appears that prompts you to
enter the fax number again after you enter a fax number.
- Fax numbers cannot be entered if [Manual Destination Input] is prohibited in Administrator Settings. For
details on the [Manual Destination Input] setting, refer to the [User's Guide Network Administrator]. If
user authentication is enabled, whether to permit [Manual Destination Input] is determined for each reg-
istered user. For details on user registration, refer to the [User's Guide Copy Operations].
Settings
[Fax Number] Enter a fax number on the displayed screen or by using the Keypad.
If you have entered an incorrect number, move the cursor to the character
to be changed, press [Delete], and then enter the number again.
•
[Tone]:
When using a dialing (pulse) telephone line, press this button for gen-
erating push-button tones. Use this function when using fax informa-
tion services. When you press this button, [T] appears on the screen.
From the dialing (pulse) telephone line, pressing [1] switches to the
push-button tones.
• [Pause]:
Press this button to insert a pause in the dialing number. Pressing
[Pause] once inserts one second of interval. You can also enter pauses
successively. When you press this button, [P] appears on the screen.
If the PBX (Private Branch eXchange) connection is enabled, to ensure
the connection to the external line when calling from the in-house wir-
ing, press [Pause] after the outside line access code such as [0]. When
you press this button, [P] appears on the screen.
• [-]:
Press this button to separate a dial number. It does not affect the dial-
ing of the number. When you press this button, [-] appears on the
screen.
[Next Destination] Press this button to specify another destination after entering a fax number
or a registered number.
[Enter Registered No.] Press this button to display the Enter Registered No. screen. Enter a reg-
istered number using the Keypad, and press [Apply].
[Main Screen] Press this button to return to the Address Book screen with the changed
settings applied.