3 removing fusing unit ef-103, 1 removal procedures, 1 removing ef-103 from the main body – Konica Minolta bizhub PRESS C1070 User Manual
Page 18: Removing fusing unit ef-103, Removal procedures -2, Removing ef-103 from the main body -2, 3removing fusing unit ef-103
bizhub PRESS C1070/C1070P/C1060
3-2
3.1
Removal Procedures
3
3
Removing Fusing Unit EF-103
This section describes the procedures to remove EF-103 and the feed guide parts for envelopes.
When using paper other than envelopes, follow the procedure below to replace the fusing unit and remove
the parts installed in the tray.
3.1
Removal Procedures
3.1.1
Removing EF-103 from the Main Body
1
Turn off the machine's sub and main power switches, and then unplug the power cord from the outlet.
% Be sure to turn off the sub power switch first.
2
Open the front door [1].
3
To pull out the ADU [3], push the lock [2] of the ADU release
lever M1 [1] to the left, then turn the ADU release lever M1 [1]
counterclockwise.
NOTICE
Please confirm that process unit has not been pulled out
when pulling out the ADU drawer.