Konica Minolta bizhub PRESS C1070 - Manual (Page 26)

bizhub PRESS C1070/C1070P/C1060 4-4
4.2 Copy Operation 4
4.2 Copy Operation
In order to use envelopes, the paper setting for the tray loaded with the envelopes must be modified before
selecting the desired copy conditions. Change the paper setting from [Tray Setting] on the Machine Screen
when using the modified setting as a default, or from [Paper Presetting] on the Copy Screen to use it tempo-
rarily.
This section describes how to change the Tray Setting and then to start copy operations.
d
Reference
For details on Tray Setting, Paper Presetting, and how to load originals and to make copy settings, refer to
the HTML user's guide.
0 With Fusing Unit EF-103 installed, only the lower tray (tray 5) of Paper Feeder Unit PF-707 is available.
Furthermore, the paper type and size of tray 5 are automatically fixed to [Envelope] and [Custom], re-
spectively.
0
The width and length of envelopes can be entered in the custom size setting. For details on the width
and length of the envelopes, refer to page 4-2.
0
Transfer Offset Adjustment of Process Adjustment is limited to the items for "Front." Note also that Pro-
cess Speed Setting cannot be made.
0 Curl Adjustment, Double Feed Detection, and RU Curl Adjustment are automatically fixed to OFF.
0 The print side is automatically limited to simplex, and the output side to Face Up.
1
Press [Paper Setting] on the Machine Screen.