Konica Minolta bizhub 552 - Manual (Page 30)

Drum unit, Ozone filter, Toner filter replacement instructions
4
5. Secure the drum unit [1] to the devel-
oping unit with the two levers [2].
NOTE
• Push the front and back levers in
the direction of the arrow at a time
to secure the drum unit.
• Make sure the drum unit is securely
fixed with two levers.
• Check that the front lever [3] of the
drum unit is parallel to the vertical
line marked on the label [4] on the
developing unit.
6. Insert the imaging unit [1] into the
machine, and tighten the shoulder
screw [2] to secure the drum unit.
A2WUF2C063DA
[1]
[2]
[2]
[4]
[3]
A2WUF2C064DA
[1]
[2]