Konica Minolta bizhub C353 - Manual (Page 31)

C353 2-20
Administrator Operations 2
5
Touch [OK].
? What happens if the HDD Lock Password entered does not meet the requirements of the Password
Rules?
% If the HDD Lock Password entered does not comply with the Password Rules, a message appears
that tells that the HDD Lock Password entered cannot be used. Enter the correct HDD Lock Pass-
word. For details of the Password Rules, see
"Password Rules" on page 1-8 .
% To change the HDD Lock Password, see "Changing the HDD Lock Password" on page 2-21 .
6
To prevent entry of a wrong password, enter the 20-digit HDD Lock Password once again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the HDD Settings screen.
7
Touch [OK].
? What happens if there is a mismatch in the HDD Lock Passwords?
% If there is a mismatch in the HDD Lock Passwords, a message appears that tells that there is a mis-
match in the HDD Lock Passwords. Perform steps 4 through 7 once again.
8
Make sure that a message appears prompting you to turn OFF and then ON the main power switch.
Now, turn OFF and then turn ON the main power switch.
2
Note
NEVER forget the HDD Lock Password set through the above procedure. The HDD Lock Password
must be entered when changing canceling the HDD Lock Password.