Konica Minolta bizhub PRO C65hc - Manual (Page 8)

2 IC-304 Print Controller 2.1 Release Notes
Installing IC-304 Print Controller 2.1
This section describes how to the install the IC-304 print controller 2.1 software.
Perform this upgrade when IC-304 print controller 2.0 is already installed.
Notes:
• Before you install IC-304 print controller 2.1, back up your configuration. For
more information see Backing up the configuration of your IC-304 Print
Controller.
• If any anti-virus software is running on the IC-304 print controller, disable this
software before installing version 2.1. Once you install version 2.1, the anti-virus
software can be enabled.
Backing up the configuration of your IC-304 Print
Controller
The backup and restore configuration feature enables you to backup your IC-304
print controller configuration so that you can restore it when necessary.
Note: Make sure to backup the system configuration to a network or an external drive.
1. On the toolbar, click Resource Center.
The Resource Center window appears.
2. In the Resource list, select Backup & Restore Configuration.
3. In the Backup configuration area, click Browse.
The Save dialog box appears.
4. Find the desired directory path for the backup.
5. Enter a name for the file. For best results, use the current date as part of the file
name.
6. Click Save.
7. In the Resource Center window, click Start Backup.
8. When the Configuration backup completed message appears, click OK.
Make sure you restore the configuration file after installing IC-304 print controller 2.1
in case some of your resources are missing.
Upgrading to version 2.1
1. Exit the IC-304 print controller software.
Wait until the Color Server icon on the task bar disappears. Before you upgrade
your software with the new version, you need to remove the current IC-304
software.