Finisher support, Finishing configurations, Multi hole punch – Konica Minolta bizhub PRO C65hc User Manual
Page 17: Finishing configurations multi hole punch
New Features
11
Finisher Support
Finishing Configurations
In this version, three new finishing configurations were added:
•
Stacker, Saddle stitch, and Stapler
•
Multi fold, Stacker, and Saddle stitch
•
Multi fold, Stacker, and Perfect binder
Multi Hole Punch
In this version, the Multi hole punch is supported. The Multi hole punch is compatible
with copiers and finishing devices, and is used for punching a variety of die set
patterns. There are two base units configured to punch letter size and A4 size
documents. Although the configurations are similar, they differ to accommodate
power and edge registration.
Sheets that pass through the punch path are punched as individual sheets along the
lead edge. Punch chads are collected in a punch container.
Each Multi hole punch module has two paper paths, punch and bypass. Sheets
directed through the bypass are passed to the connected finishing device.