Konica Minolta bizhub PRO C65hc - Manual (Page 27)

Pro Kit Features 21
7. Under Orientation, select Portrait or Landscape.
8. From the Binding list, select the appropriate binding method.
9. Click Save.
All saved templates appear on the Imposition tab, under Layout. After you select an
imposition method, and Take from template, the related templates appear in the
Templates list. For example, if you created a Step and Continue template, the
template appears in the Templates list only when you select the Step and Continue
imposition method.
Note: A Step and Repeat imposition template will appear in the Templates list when the
Repeat image imposition method is selected.
Viewing Templates
As you create or modify a template, you can see your template in the template
viewer. As you select parameters, the template viewer dynamically changes to
reflect your selections
.
Note: The Orientation setting in the Imposition Template Builder is for
display purposes only. This parameter is not saved in the template. (You set
job orientation on the
Imposition tab, under Layout .)
Note: Binding is available only when Saddle Stitch and Perfect Bound
imposition methods are selected.
Notes:
•
When Simplex is selected, only the Front view is available.
• Sheet size is set under Layout, on the Sizes tab. The sheet size that
appears in the template viewer is dynamic. It changes to accomodate
the parameters that you choose.