Konica Minolta bizhub PRO C65hc - Manual (Page 31)

Pro Kit Features 25
4. Type the new name, and press E NTER .
To edit template settings:
1. In the Imposition Template Builder, from the Method list, select the imposition
method, and then select the template that you want to edit.
2. Change the desired settings.
3. Click Save.
To delete a template:
1. In the Imposition Template Builder, from the Method list, select the imposition
method, and then select the template that you want to delete.
2. Click Delete.
3. Confirm that you want to delete the selected template.
Simulating Jobs With Your Template
You can simulate how jobs from the Storage window will look if you apply an
imposition template to them.
To simulate a job with a specific imposition template:
1. In the Imposition Templates Builder window, click the Simulate button.
2. Click Browse.
The Storage window appears.
3. Select a job, and then click Select.
The parameters of the job (Sheet Size, Trim Size, Trim Orientation, Sets per
sheet, Bleed Size, Rotate 90, Crop Marks, and Fold Marks) appear with their
values in the Simulate Imposition window.
4. Change the parameters as desired.
Note: The impostion template parameters are not actually applied to the job — you
are viewing only a simulation of how the job would look if this template were
selected on the
Imposition tab.
Note: Both RTP and non-RTP jobs are available for simulation.