Konica Minolta BIZHUB C652DS - Manual (Page 139)

bizhub C652/C652DS/C552/C552DS/C452 6-9
6.3 Copier Settings 6
Half-Fold/Tri-Fold Specifi-
cation Specify whether to apply Half-Fold/Tri-Fold for all pages together or for
specific pages when handling a job containing multiple pages.
When Booklet is selected simultaneously with Half-Fold, all pages are half-
folded together even if [One Sheet at a Time] is selected.
If the number of original pages exceeds the folding capacity of this ma-
chine, the "Fold" function setting is cancelled automatically, and the sheets
are printed without being folded.
This item is displayed if the Saddle Stitcher SD-508 is installed in the Fin-
isher FS-526.
To change the folding capacity, contact your service representative.
Half-folding capacity setting: 1-3 (default:3)
Tri-folding capacity setting: 1-3 (default:1)
Half-Fold Specification Specify whether to apply Half-Fold together for all pages or for each page
when handling a job containing multiple pages.
When Booklet is selected simultaneously with Half-Fold, all pages are half-
folded together even if [One Sheet at a Time] is selected.
If the number of original pages exceeds the folding capacity of this ma-
chine, the "Fold" function setting is cancelled automatically, and the sheets
are printed without being folded.
This item is displayed if the Saddle Stitcher SD-509 is installed in the Fin-
isher FS-527.
To change the folding capacity, contact your service representative.
Half-folding capacity setting: 1-3 (default:3)
Print Jobs During Copy
Operation Appears when user access is permitted under Administrator settings. For
details, refer to page 7-43.
Automatic Image Rotation
Finishing Program Configure whether to display the Finishing Program button in the basic set-
tings screen. To display the button, register the contents of the finishing
program.
Register frequently used finishing functions so that you can set them at
once by using the button that appears in the basic settings screen.
This item is set if the finisher is installed.
Card Shot Settings Appears when user access is permitted under Administrator settings. For
details, refer to page 7-43.
Factory default
Auto Booklet ON when
Fold & Staple Auto Select Booklet
Auto Zoom for Com-
bine/Booklet Auto Display Zoom Ratio
Auto Sort/Group Selection Yes
Default Copy Settings Factory Default
When AMS Direction is In-
correct Print
Separate Scan Output
Method Page Print
Enlargement Rotation Allow
Auto Zoom (Platen) OFF
Auto Zoom (ADF) ON
Specify Default Tray when
APS Off Tray Before APS ON
Select Tray for Insert Sheet Tray 2
Tri-Fold Print Side Inside
Half-Fold/Tri-Fold Specifi-
cation Multiple Sheets
Half-Fold Specification Multiple Sheets
Settings