Konica Minolta BIZHUB C652DS - Manual (Page 151)

bizhub C652/C652DS/C552/C552DS/C452 7-3
7.1 System Settings 7
7.1 System Settings
Configure the basic functions of this machine.
7.1.1 Power Save Settings
Configure the settings for the power-saving mode.
%
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Power Save
Settings].
Settings
Low Power Mode Settings Enter a time period before switching to the lower power mode when this
machine is not being operated.
Sleep Mode Settings Enter a time period before switching to the sleep mode when this machine
is not being operated.
Power Save Key Configure the type of the power save function to be started when you press
the [Power Save] key.
Low Power Provides power-saving effect higher than normal.
Sleep Although this machine conserves more energy in
the sleep mode than in the power save mode, the
machine must warm-up when the sleep mode is
canceled, therefore taking more preparation time
than the power save mode.
Enter Power Save Mode Configure settings for switching to the power save mode after printing doc-
uments from computers or receiving faxes.
Normal Enters the power save mode when the time spec-
ified in Low Power Mode Settings has elapsed.
Immediately Enters the power save mode in a short time.
Factory default
Low Power Mode Settings 15 minutes
Sleep Mode Settings 30 minutes
Power Save Key Lower
Enter Power Save Mode Immediately