Konica Minolta BIZHUB C652DS - Manual (Page 90)

bizhub C652/C652DS/C552/C552DS/C452 5-24
5.4 Application 5
d
Reference
To configure the 2-sided copy mode:
Press [Basic] ö [Duplex/Combine].
Insert Image
A multi-page original scanned on the original glass can be inserted at the pre-set location in an original first
scanned with the ADF.
0 With the Insert Image function, the inserted original is added after the specified page.
0 You can specify up to 30 positions for the original to be inserted.
0 If the document scanned on the original glass has more pages than the number of pages specified in
the Insert Image screen, the remaining pages of the inserted original are printed at the end of the
original.
0 The original on the original glass is scanned with the same settings as for the original scanned in the
ADF.
0 If the original scanned on the original glass has fewer pages than the number of pages specified in the
Insert Image screen, the missing insertion pages will not be printed.
0 If the same page number is specified twice, two insertion original pages are added at the specified
location.
0 If the specified page number is greater than the total number of pages in the main original, the
corresponding insertion original page is added at the end of the copy.
1
Load the original into the ADF.
Blank Select this option to insert the specified paper sheet after the page you have
specified.
When setting the specified page to "3"
For 1-sided copy:
Inserts the specified paper as the fourth page of the copy.
For 2-sided copy:
Leaves the back side of the second page of the copy blank, and inserts the
specified paper for the third page of the copy.
Settings
6
6
4
4
5
6
6
5
5
4
4
3
3
6
6
5
5
4
4
3
3
2
2
1
1
REPORT
3
3
2
2
1
1
REPORT
1
1
2 REPORT
4
4
3
3
2
2
1
1
REPORT
B
A
4
3
B
2
A
1
1
REPORT