Konica Minolta bizhub 652 - Manual (Page 13)

bizhub 652/552 3-2
3.1 Connection method and installation procedure 3
3 Installation of Fax Driver
This chapter describes how to install the fax driver.
3.1 Connection method and installation procedure
Before you can use this printing system, you must install the fax driver. The fax driver refers to the program
that controls such operations as processing of data to be output. Before using this printing system, install the
fax driver from the attached CD to your computer.
Installation procedure for the Windows fax driver differs depending on the operating system and connection
method to be used.
d
Reference
For details on setting method in the network environment, refer to [User's Guide Network Administrator].
3.1.1 Windows Vista/7/Server 2008/Server 2008 R2
Reference
- When using Windows Vista/7/Server 2008/Server 2008 R2, log on to the computer using a user name
with Administrator privileges, and then install the printer driver.
d
Reference
Before you can use this machine in the network environment, you must configure network settings for this
machine. For details, refer to [User's Guide Network Administrator].
Reference
- For setup procedures using Add Printer Wizard, this manual only covers printing through
LPR/Port9100. For setup procedures for other network connection methods (SMB, IPP/IPPS, Web
service print), refer to [User's Guide Print Operations].
- For USB connection, this manual covers only the plug and play-based setup procedures.
Setup procedures Connection method Reference page
Connection method in
which installer-based set-
up is possible Network con-
nection Port9100 p. 3-4
* Select a connection method during in-
stallation procedures. Select [Normal
Printing] for the Port9100 or USB con-
nection method, [Internet Printing] for
the IPP connection method, or [Secure
Printing] for the IPPS connection meth-
od.
* The installer supports both IPv4 and
IPv6 environments. Note that for IPv6, it
supports Port9100 only.
IPP
USB
Connection method in
which setup is possible
using Add Printer Wizard Network con-
nection LPR p. 3-9
Port9100
SMB
IPP/IPPS
Web service
print
USB
Connection method in
which plug and play-
based setup is possible USB p. 3-15