Konica Minolta magicolor 7450 grafx - Manual (Page 9)

Starting the Firmware Updater 5
5
The list of printer drivers is displayed. Select the appropriate connection
for the environment where the printer is being used.
"
If you select “Network port” or “Local port”, make sure that the
printer driver has been installed.
If you select “Printer IP address”, the firmware can be updated even
if a printer driver is not already installed.
For a Network Connection Select “Network port”. → Continue
with page 6.
For a Local Connection Select “Local port”.
→ Continue with
page 9.
When Specifying the IP Address of
the Printer Select “Printer IP address”. → Con-
tinue with page 12.
mcPS_Firmware.book 5 ページ ２００７年１０月９日 火曜日 午後２時７分