Konica Minolta BIZHUB 223 - Manual (Page 90)

bizhub 423/363/283/223 2-75
2.16 SNMP Setting Function 2
<From PageScope Web Connection>
0 For the procedure to access the Admin Mode, see page 2-2.
0 Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1
Start PageScope Web Connection and access the Admin Mode.
2
Select [SNMP Setting] from the pull-down menu of Network and click [Display].
3
Enter the auth-password and priv-password in the boxes marked by the rectangle, that is, the Write
side SNMP v3 Setting.
% For the current password, enter the MAC Address that is set in the machine. To check the MAC Ad-
dress, see step 7 of page 2-70.
% The entry of a wrong SNMP password (auth-password, priv-password) is counted as unauthorized
access, if the Enhanced Security Mode is set to [ON]. If a wrong SNMP password (auth-password,
priv-password) is entered a predetermined number of times (once to three times) or more set by the
Administrator of the machine, the machine is set into an access lock state, rejecting any more logon
attempts. To cancel the access lock state, perform the Release Setting by the Administrator of the
machine.