Konica Minolta Printgroove POD User Manual
Page 49
Advertising
3
Preparation for Use
3-24
Printgroove POD Serve Quick Start Guide
3.5.5
Verifying the Installation (Mac)
To verify the installation, follow this procedure:
1
Select [System Preferences] --> [Hardware] --> [Print & Fax]. The [Print
& Fax] folder opens:
2
[Printgroove POD Driver] should appear in the left-side menu. Select
the driver then click the [Printer Setup...] button. The Printer Info screen
opens.
3
Select [Printer Model] from the drop-down menu located at the top of
the screen. The version information about Printgroove POD Driver is
displayed.
4
Close the screen. You may now use the Printgroove POD Driver.
Advertising
This manual is related to the following products: