Konica Minolta bizhub 25 - Manual (Page 128)

Specifying the Network Settings 2-75
1
2
Management
Setting the Automatic Logout Time
You can set the time it takes before the machine automatically logs out a logged in user if
no operations have been performed on the machine.
Note
You can also set the automatic logout time using • Message Board. For details, refer
to Chapter 3, “Specifying Device Settings” in the Message Board Guide.
For details on manually logging out, refer to “ • Logging Out ”. (See page 1-46.)
Press <Setting>.
1
Press [Management].
2
If an administrator password is set, enter the password and press [Enter].
3
If an administrator password is not set, proceed to step 4.
Press [Network Settings].
4
Press [Automatic LogoutTime].
5