Setting the passcode, Setting the passcode -14 – Konica Minolta bizhub 25 User Manual
Page 67
2-14 Closed Communication
Setting the Passcode
Set the passcode required for closed transmission, closed reception, and passcode polling.
You can use closed transmission and reception without setting a passcode; however,
setting a passcode is recommended to strengthen the security function.
Note
When setting the passcode, enter a number other than “0000”. If you enter “0000”,
•
the passcode setting is disabled.
Make sure that you do not forget the passcode.
•
For details on the communication range using closed communication and passcodes,
•
refer to “
Communication and Range of Passcodes
”.
Press <Setting>.
1
Press [Management].
2
If an administrator password is set, enter the password and press [Enter].
3
If an administrator password is not set, proceed to step 4.
Press [Security Communication].
4
Press [Passcode].
5