Setting mode protection, Setting mode protection -32 – Konica Minolta bizhub 25 User Manual
Page 85
2-32 Setting Mode Protection
Setting Mode Protection
You can prohibit the copy, scanner, fax, or printer modes from being used.
For example, if you enable Copy Protect, the machine will not switch to the copy screen,
even if <Copy> is pressed.
Note
If you prohibit the use of the mode set as the
•
ready screen, the ready screen will
automatically be changed to the My MFP screen.
You can also prohibit the use of modes by user policy using the user policy settings
•
of Message Board. For details, refer to Chapter 3, “Setting Security” in the Message
Board Guide.
Press <Setting>.
1
Press [Management].
2
If an administrator password is set, enter the password and press [Enter].
3
If an administrator password is not set, proceed to step 4.
Press [Mode Protect Setting].
4