Konica Minolta bizhub PRESS C1085 - Manual (Page 75)

bizhub PRESS C1100/C1085 6-25
6.2 Image Quality Adjustment 6
Tips
- Exact Color and G7 Calibration, which are high-level calibration functions, are set so that either one of
them is available. If you want to change the function, contact your service representative.
6.2.6 Particular adjustment
If a particular adjustment is required, for example, before printing out an image with a higher level of quality
or when the expected chromogenic effect has not been obtained as expected, adjust the following items:
d
Reference
For details about the adjustment procedure, refer to the [HTML User's Guide].
NOTICE
Precaution on using [Color Density Control]
To use [Each Paper Type Color Adj.] in [Color Density Control], carry out [Each Paper Type Color Adj.] before
starting this procedure, then configure a tray setting.
For details, refer to the [HTML User's Guide].
Adjustment
order Menu item Description Tips
1 Gamma Auto-
matic Adj. Adjusts the curve of the output density against
the input density.
This affects the brightness and contrast.
On the [MACHINE] screen, select [ADJUST-
MENT] - [Execute Adjust Operation] - [Gamma
Automatic Adj.] to execute processing. [HTML User's
Guide]
2 Maximum Den-
sity Adjustment Changes the maximum density adjustment value
when the measurement density that was ob-
tained after calibration does not match the refer-
ence adjustment value.
[Administrator Setting] - [System Setting] - [Ex-
pert Adjustment] - [Process Adjustment] - [Maxi-
mum Density Adjustment] [HTML User's
Guide]
3 Color Density
Control Executes automatic calibration.
On the [MACHINE] screen, select [ADJUST-
MENT] - [Color Density Control] - [Basic Setting]
or [Color Density Manual Control] to carry out the
adjustment. p. 6-16
4 Printer control-
ler calibration Executes manual calibration.
Use Fiery Command WorkStation. p. 6-21