Konica Minolta BIZHUB C360 - Manual (Page 27)

bizhub C360/C280/C220 3-16
3.3 Installation using Add Printer Wizard 3
10
In the [Printer Name or IP Address:] box, enter the IP address for the machine, and then click [Next >].
% If the [Additional Port Information Required] dialog box appears, go to Step 11.
% If the [Finish] screen appears, go to Step 14.
11
Select [Custom], and then click [Settings...].
12
Change the settings according to the port, and then click [OK].
% For LPR connection, select [LPR], and then enter [Print] in the [Queue Name:] box.
% You must discriminate between upper and lower case letters when entering it.
% For Port9100, select [Raw], and then enter a RAW port number (initial setting: [9100]) in the [Port
Number:] box.
13
Click [Next >].
14
Click [Finish].
[Add Printer Wizard] appears.
15
Click [Have Disk...].
16
Click [Browse...].
17
Select a desired fax driver folder on the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
18
Click [OK].
The [Printer:] list appears.
19
Click [Next >].
20
Follow the instructions on the pages that follow.
% If the [Digital Signature] window appears, click [Yes].
21
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] window.
22
Remove the CD-ROM from the CD-ROM drive.
This completes the fax driver installation.