Konica Minolta BIZHUB C360 - Manual (Page 14)

bizhub C360/C280/C220 3-3
3.1 Connection method and installation procedure 3
3.1.2 Windows 2000/XP/Server 2003
Reference
- When using Windows 2000/XP/Server 2003, log on to the computer using a user name with the Admin-
istrator privilege, and then install the printer driver.
d
Reference
Before you can use this machine in the network environment, you must configure network settings for this
machine. For details, refer to [User's Guide Network Administrator].
Reference
- For setup procedures using Add Printer Wizard, this manual only covers printing through
LPR/Port9100. For details on other network connections (SMB, IPP/IPPS), refer to [User's Guide Print
Operations].
- The installer does not support installation in the IPv6 environment of Windows 2000/XP/Server 2003.
- For USB connection, this manual covers only the plug and play-based setup procedures.
3.1.3 Windows NT4.0
Reference
- When using Windows NT4.0, log on to the computer using a user name with the Administrator privilege,
and then install the printer driver.
d
Reference
Before you can use this machine in the network environment, you must configure network settings for this
machine. For details, refer to [User's Guide Network Administrator].
Reference
- In Windows NT4.0, to install the printer driver for this machine connected directly to the network using
TCP/IP protocol, you must have the [Microsoft TCP/IP Printing] service installed in your computer.
- To use the installer in Windows NT4.0, you must have Internet Explorer 5.0 or later installed in your com-
puter.
- The installer does not support installation in the IPv6 environment of Windows NT4.0.
Setup procedures Connection method Reference page
Connection method in
which installer-based set-
up is possible Network con-
nection Port9100 p. 3-4
* Select a connection method during in-
stallation procedures. Select [Normal
Printing] for the Port9100 or USB con-
nection method, [Internet Printing] for
the IPP connection method, or [Secure
Printing] for the IPPS connection meth-
od.
IPP/IPPS
USB
Connection method in
which setup is possible
using Add Printer Wizard Network con-
nection LPR p. 3-12
p. 3-15
Port9100
SMB
IPP/IPPS
USB
Connection method in
which plug and play-
based setup is possible USB p. 3-17
Setup procedures Connection method Reference page
Connection method in
which installer-based set-
up is possible Network con-
nection LPR p. 3-4
* Select a connection method during in-
stallation procedures. Select [Normal
Printing] for the LPR connection meth-
od.
Connection method in
which setup is possible
using Add Printer Wizard Network con-
nection LPR p. 3-15