Konica Minolta BIZHUB C360 - Manual (Page 360)

bizhub C360/C280/C220 15-40
15.5 Glossary 15
Property Attribute information.
When using a printer driver, you can use its property to configure different func-
tions.
Also by using a file property, you can check the attribute information about the
file.
Profile A color attribute file.
This contains overall input and output correlation data of primary colors, specifi-
cally used by the color input and output devices to reproduce colors.
Closed Network RX A function to accept only transmissions from recipient machines with a matching
password.
Host name The name of a device on the network.
Pause A temporary break in dialing. In this machine, each pause creates a one second
break during dialing.
Port Number A number used to identify the transmission port assigned to each process run-
ning on a computer on the network. The same port cannot be used by multiple
processes.
Polling A function available on the receiver's side to request a sender to send originals
set or stored in the sender's machine or memory.
Multi Page TIFF A TIFF file that contains multiple pages.
Memory A storage device used for storing data temporarily.
Some types of memory retain data even after the power is turned off, while others
not.
Memory overflow A condition where the fax memory becomes full while scanned documents or
temporarily stored documents are saved.
Memory transmis-
sion A method used to start a fax transmission after scanning originals and storing
them in memory. If memory transmission is used, the total number of pages are
automatically printed in the page number of the transmission source information
and an image of the first page of the sent document is printed in the transmission
report. However, the memory may become full if the document contains many
pages, or there is a large amount of information due to high image quality.
Main Scanning The operation of scanning a document optically, and converting the document
into image data.
Scan Size A function to specify the scanning size of an original to transmit it. If the width of
the paper in the recipient's fax machine is smaller than that of the transmitted
document, the document will usually be reduced for printing purposes. If you do
not want to reduce the document size, specify the same document size as that
of the paper in the recipient's fax machine, so that you can send the document
with its original size.
Redial A function to re-dial a fax number after waiting for a specified length of time when
recipient's line is busy. Both manual redial and automatic redial functions are
available.
2-Sided Binding Di-
rection A function to specify the binding position of a double-sided document when it is
sent using ADF. Two types of binding positions are available for a double-sided
original: One is the top/bottom binding with the binding position at the top or bot-
tom of the original.The other is left/right binding with the binding position at the
left (or right) of the original.Note that the second side of the original has a different
top/bottom relationship.
Local printer A printer connected to a parallel or USB port of a computer.
Erase A function of erasing dark shadow around the document before transmitting it via
fax, when scanning a booklet form document or a document with ADF kept open.
Term Description