Ike settings, 4 [sa, Sa setting – Konica Minolta BIZHUB C360 User Manual
Page 165: Ike settings] -27, Sa] -27 [sa setting] -27
bizhub C360/C280/C220
8-27
8.9
Communicating using IPsec
8
[IKE Settings]
In the administrator mode of PageScope Web Connection, select [Network] ö [TCP/IP Setting] ö [IPsec]
ö [IKE] ö [Edit].
(Up to four groups can be registered for the IKE. )
8.9.4
[SA]
In the administrator mode of PageScope Web Connection, select [Network] ö [TCP/IP Setting] ö [IPsec].
[SA Setting]
In the administrator mode of PageScope Web Connection, select [Network] ö [TCP/IP Setting] ö [IPsec]
ö [SA] ö [Edit].
(Up to eight groups can be registered for the SA. )
Item
Description
Prior check
[Encryption Algo-
rithm]
Select an encryption algorithm to be used for creation of
the common key.
[Authentication Al-
gorithm]
Select an authentication algorithm to be used for creation
of the common key.
Item
Description
Prior check
[Lifetime After Es-
tablishing SA]
Enter a validation period of the common key that is used
for encrypted communication.
When this period has expired, a new key is created. This
can secure the communication.
Item
Description
Prior check
[Security Protocol]
Select a security protocol to use.
[ESP Encryption
Algorithm]
If you have set the Security Protocol to [ESP], select the
ESP encryption algorithm.
[ESP Authentica-
tion Algorithm]
If you have set the Security Protocol to [ESP], select the
ESP authentication algorithm.
[AH Authentication
Algorithm]
If you have set the Security Protocol to [AH], select the AH
authentication algorithm.