Konica Minolta BIZHUB C360 - Manual (Page 194)

bizhub C360/C280/C220 10-2
10.1 Specifying the date and time of this machine 10
10 Managing
10.1 Specifying the date and time of this machine
Specify the date and time of the clock built into this machine.
Select one of two procedures: manually specifying the date and time and obtaining them from the NTP server
via the network.
Before using Fax in this machine, specify the date and time of this machine. When connecting this machine
to Active Directory, specify the date and time of this machine as required.
Specify the date and time of this machine when using this machine for the following purposes. For details,
refer to the relevant reference page.
- "Searching for the E-mail address in the LDAP server" (p. 10-5)
- "Restricting users of this machine (Active Directory)" (p. 7-10)
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
Do you use NTP?
No Yes
[Manual Setting] [TCP/IP Settings]
[Time Zone]
[Time Adjustment Setting]
Finish