Konica Minolta BIZHUB C360 - Manual (Page 21)

bizhub C360/C280/C220 2-3
2.1 Basic settings for TCP/IP communication 2
[DNS Host]
[DNS Domain]
[DNS Server Settings (IPv4)]
[Device Setting]
In [Administrator Settings] on the Control Panel, select [Network Settings]ö[Forward]ö[Detail Set-
tings]ö[Device Setting].
Item Description Prior check
[Dynamic DNS Set-
tings] Select [Enable] when automatically registering the host
name specified in [DNS Host Name] with the DNS server
that supports the Dynamic DNS function. Is Dynamic DNS
supported?
[DNS Host Name] Specify the host name of this machine (up to 63 charac-
ters).
Item Description Prior check
[Domain Name
Auto Retrieval] Select whether to automatically obtain the domain name.
This item is necessary when DHCP is enabled. Can it be obtained
automatically using
DHCP?
[Search Domain
Name Auto Re-
trieval] Select whether to automatically obtain the search domain
name.
This item is necessary when DHCP is enabled. Can it be obtained
automatically using
DHCP?
[Default DNS Do-
main Name] When not automatically obtaining the domain name,
specify the name of the domain that contains this machine
(up to 255 characters, including the host name). Default Domain
Name
[DNS Search Do-
main Name 1] to
[DNS Search Do-
main Name 3] Specify the DNS search domain name (up to 253 charac-
ters).
Item Description Prior check
[DNS Server Auto
Obtain] Select whether to automatically obtain the DNS server ad-
dress.
This item is necessary when DHCP is enabled. Can it be obtained
automatically using
DHCP?
[Priority DNS Serv-
er] Enter the address of the primary DNS server if you do not
obtain the DNS server address automatically. Server address
[Secondary DNS
Server 1] to [Sec-
ondary DNS Server
2] Specify the addresses of the secondary DNS servers. Server address