Konica Minolta BIZHUB C360 - Manual (Page 48)

bizhub C360/C280/C220 4-12
4.3 Sending scanned data by E-mail 4
4.3.4 SMTP Authentication
In the administrator mode of PageScope Web Connection, select [Network] ö [E-mail Setting] ö [E-mail
TX (SMTP)].
[Proxy Server Ad-
dress] To confirm the expiration date via a proxy server, enter its
address.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can
enter the host name instead.
When using IPv6, you can specify the IPv6 address. Server address
[Proxy Server Port
Number] Enter the port number of a proxy server. Server port number
[User Name] Enter the user name to log in to the proxy server (up to 63
characters).
[Password is
changed.] Select this check box to change the password.
[Password] Enter the password to log in to the proxy server (up to 63
characters).
[Address not using
Proxy Server] To enable expiration date confirmation, specify an ad-
dress that does not use the proxy server depending on
your environment.
If the DNS server has already been configured, you can
enter the host name instead.
When using IPv6, you can specify the IPv6 address.
Item Description Prior check
Item Description Prior check
[SMTP Authentica-
tion] Select this check box to perform SMTP authentication.
For SMTP authentication, the authentication method with
the highest strength that is supported by the SMTP server
is automatically selected from Digest-MD5, CRAM-MD5,
PLAIN, and LOGIN. Is SMTP authentica-
tion requested by the
server?
[User ID] Enter the user ID for SMTP authentication (up to 255
bytes).
[Password is
changed.] Select this check box to change the password.
[Password] Enter the password for SMTP authentication (up to 128
bytes, excluding space and ").
[Domain Name] Enter the domain name (realm) for SMTP authentication
(up to 255 characters).
This setting is required when the authentication method is
set to Digest-MD5.
If there is only one user domain (realm), you do not need
to enter this item because the domain name is reported
from the SMTP server at initial communication, and with
the domain name, a communication is established auto-
matically. If there are two or more user domains (realm),
specify the user domain name. Authentication Meth-
od
[Authentication
Setting] For user authentication, select whether to synchronize
SMTP authentication with user authentication.
Selecting [User Authentication] uses the user name and
password for user authentication as those for SMTP au-
thentication.
Selecting [Set Value] uses the values specified in [User ID]
and [Password]. Synchronized with
user authentication?