Konica Minolta bizhub C352 - Manual (Page 287)

4 Specifying settings using PageScope Web Connection
4-30 C352
Sp
ecif
yin
g
se
tt
in
gs
u
s
in
g Pag
e
Scope
We
b Co
nne
ctio
n
Chapter 4
When “Group: Scan” is selected
Bind Direction If book scanning is enabled, select the binding direction.
Erase Specify the width of the perimeter of the document to be
erased.
Item Description
Item Description
No. Enter the registration number.
Name Enter the registration name (up to 24 characters).
Group Click , and then select a group destination from the list to
display the group number.
Resolution Select the resolution.
File Type Select the file format.
Scan Setting Select the unit of the data to be saved.
Subject Specify the subject (Not Specified, 1 to 10). When “Not
Specified” was selected, the default title is used. Click
to
check the contents.
Text Specify the text (Not Specified, 1 to 10). When “Not Specified”
was selected, the default text is used. Click
to check the
contents.
Simplex/Duplex Select “1-Sided”, “2-Sided”, or “Cover + 2-Sided”.
Original Type Select the quality of the original such as text or photo.
Color Select the color mode. The file formats that can be saved may
be limited depending on the color settings. For details, refer to
“File Type” on page 2-44.
Separate Scan Select “ON” or “OFF”.
Background Removal Adjust the background darkness.
Scan Size Select the original size (“Auto”, “Standard Size”, “Custom
Size”).
For “Custom Size”, specify the horizontal and vertical
scanning sizes.
E-Mail Notification The upload destination of the file can be notified to the
specified address.
Destination Click to select the notification addresses.
File Name Enter the file name (up to 30 characters).
Original Direction Select the orientation of the original document.
Bind Select the original binding position.
Special Original Specify whether to specify a mixed original document.
Z Folded Original Select this setting when loading a Z-folded original document.
Book Scanning Select whether to enable book scanning.
Method If book scanning is enabled, select the scanning method type.