Konica Minolta bizhub C352 - Manual (Page 48)

Scanning documents 2
C352 2-15
Sca
nnin
g
do
cu
men
ts
Chapter 2
To search the destination
1
Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to “Specifying the scan set-
tings” on page 2-43.
2
After specifying the settings, touch [OK].
3
Load the document into the ADF (optional) or position it on the original
glass of the machine.
4
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
2
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.