Scan to smb – Konica Minolta bizhub C352 User Manual

Page 64

Advertising
background image

Scanning documents

2

C352

2-31

Sca

nnin

g

do

cu

men

ts

Chapter 2

2.5

Sending data to a PC on the network (Scan to SMB)

Scan to SMB

The Scan to SMB operation can be used to directly send the scanned data
to a specific computer on the network.

To use the Scan to File (SMB) function, specify the Windows shared file set-
ting on the computer that is to receive the data in advance.

2

Reminder

To send to a Windows shared folder, enter the host name and folder
name using capital letters when registering the destination.

2

Note

For the SMB transmission procedure, refer to “Sending the scanned data
to a computer on the network (SMB)” on page 1-5.

SMB transmission to Windows File Sharing (Mac OS X)/Samba (Linux/
Unix)

When performing SMB transmission to Mac OS X, Linux, or Unix, the condi-
tions described below must be meet for the network settings and user name.
Change the settings according to the transmission environment.

Settings on this machine
-

From [Administrator Setting] – [Network Setting] – [SMB Setting], specify
“v1” for the NTLM setting.

Settings on the server
-

For the user name and shared folder names, enter 12 characters or less.

-

When looking up a destination, the shared folder names are shown in al-
phanumeric characters only. Sub-folder names can be shown in charac-
ters other than alphanumeric characters.

-

To lookup a destination, enter the user ID and password first.

2

Note

Samba is a program that provides services for SMB clients using Unix or
Linux. In Mac OS X, Samba is called “Windows File Sharing”.

Advertising