Logging in using the authentication unit, Logging in using the authentication unit -28 – Konica Minolta BIZHUB C652DS User Manual

Page 177

Advertising
background image

bizhub C652/C652DS/C552/C552DS/C452

12-28

12.6

ID & Print

12

Reference

-

When [System Settings] - [User Box Settings] - [ID & Print Delete after Print Setting] is set to "Confirm
with User" in Administrator Settings of the machine, printing a document by specifying from "ID & Print
User Box" displays the screen to confirm the deletion of the job. For details, refer to page 13-46.

Logging in using the authentication unit

1

Press [Auth. Unit], and then press [Begin Printing].

2

Touch the authentication unit with the finger or IC card.

Once the user is authenticated, the print job is printed.

% Press [Print & Access] to enable printing of the job and a normal login.

% Logging in by pressing [Access] allows you to log in as usual without printing a job. After logging in,

open the ID & Print User Box to print the document.

% If [ID & Print Operation Settings] is set to [Print All Jobs] when there are multiple jobs, all jobs are

output in a single authentication. If it is set to [Print Each Job], the jobs are printed one by one in the
order they have been stored.

Reference

-

You can specify [ID & Print Operation Settings] in [User Authentication/Account Track] - [User
Authentication Settings] - [Administrative Settings] - [ID & Print Operation Settings] of the Administrator
Settings of the machine. For details, refer to page 13-49.

-

To select the documents to print when there are multiple print jobs, press [Access] and then print the
desired documents from the ID & Print User Box.

-

Even when the authentication unit is installed, you can enter the user information and print using [ID &
PW]. For details, refer to page 12-26.

-

To change the operation ([Begin Printing], [Print & Access], or [Access]) selected in the initial page,
select [Administrator Settings] - [User Authentication/Account Track] - [User Authentication Settings] -
[Administrative Settings] - [Default Operation Selection]. For details, refer to page 13-50.

Reference

-

For details on the optional authentication units, refer to the "User's Guide [Copy Operations]".

Advertising
This manual is related to the following products: