Konica Minolta BIZHUB C652DS - Manual (Page 192)

bizhub C652/C652DS/C552/C552DS/C452 12-43
12.11 Banner printing function 12
12.11.4 Printing
0 If the finisher FS-526 is installed, banner printing cannot be enabled.
0 The optional mount kit MK-715 may not be available depending on the sales area.
1
Press the [Utility/Counter] key on the control panel.
2
Press [Banner Printing].
3
Press [Allow], and then the [OK].
4
Check that the screen shows the machine is waiting for the banner printing job before sending the
document data of the banner size to be printed from the computer.
% If data of non-banner size is sent, the job will be discarded.
5
Open the bypass tray.
% When the mount kit is not available, go to step 8.
6
Install the mount kit to the bypass tray.