2 interfaces used for connection, Ethernet, Usb interface – Konica Minolta BIZHUB C652DS User Manual

Page 21: Connection diagram

Advertising
background image

bizhub C652/C652DS/C552/C552DS/C452

2-7

2.2

Operating environment

2

2.2.2

Interfaces used for connection

To connect this printing system to a computer, the following interfaces can be used.

Ethernet

Use this interface to use this printing system via a network connection.
It supports 1000Base-T, 100Base-TX, and 10Base-T standards. In addition, TCP/IP (LPD/LPR, IPP, SMB),
Web services, IPX/SPX (NetWare), AppleTalk (EtherTalk) protocols are supported.

USB interface

Use this interface to use this printing system via a USB connection. The USB interface can be connected to
a computer running Windows. A USB cable is required for connection. Use a type A (4 pin, male) or type B
(4 pin, male) USB cable. A USB cable measuring three meters or less is recommended.

Connection diagram

The printer cables are connected to each port on this machine.

Back side of the machine

USB port

Ethernet port (1000Base-T/100Base-TX/10Base-T)

Advertising
This manual is related to the following products: