Konica Minolta BIZHUB C652DS - Manual (Page 64)

bizhub C652/C652DS/C552/C552DS/C452 5-26
5.3 Windows 2000 5
Installing the printer driver manually using the Add Printer Wizard
0 Installing the driver to Windows 2000-based computers requires the administrator authority.
1
Insert the printer driver CD-ROM for Windows into the CD-ROM drive of the computer.
2
Press the [Start] key, and then select "Settings" - "Printers".
3
Double-click the "Add Printer" icon.
"Add Printer Wizard" appears.
4
Click [Next].
5
In the "Local or Network Printer" page, select "Network printer", and then click [Next].
6
In the "Locate Your Printer" page, select "Connect to a printer on the Internet or on your intranet".
7
In the "URL" field, enter the URL for the machine in the following format, and then click [Next].
% http://<IP address for the machine>/ipp
Example: When the IP address for the machine is 192.168.1.20, http://192.168.1.20/ipp
% When specifying to use IPPS printing, enter "https://<IP address for the machine>/ipp".
8
When the confirmation dialog box appears, click [OK].
9
Click [Have Disk].
10
Click [Browse].
11
Select a desired printer driver folder in the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers:
PCL driver, PS driver and fax driver
12
Click [OK].
The "Printers" list appears.
13
Click [OK].
14
Follow the instructions on the pages that follow.
15
Click [Finish].
% If the "Digital Signature" window appears, click [Yes].
16
After finishing the installation, make sure that the icon for the installed printer is displayed in the
"Printers" window.
17
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
Once the settings for the printer have been configured, you can use the printer in the same way as a general
local printer.